0.96-inch 160×80 IPS LCD Module with ST7735 Controller

Description

Features 0.96″ diagonal IPS display, color is more vivid than an ordinary TFT LCD screen Size: 0.96-inch 160×80 resolution, 16-bit color, 65K Full color Direction can adjust to horizontal or vertical Control chip: ST7735 4 wire SPI digital interface or I2C (IIC) Number of breakout pins: 7 Display area: 10.8 x 21.696mm 5V compatible! Use with 3.3V or 5V logic Onboard 3.3V @ 150mA LDO regulator, using 5V will provides better brightness and good viewing effect 1 white LED backlight, transistor connected so you can PWM dim the backlight 0.1″ pitch header for easy breadboarding 2 removable mounting holes in corners Current draw is based on LED backlight usage: with full backlight, current draw is ~25mA Working temperature: -20~70°C Working voltage: 3.3V Physical size: 24 x 30mm Interface definition: GND (Power ground) VCC (Power +3.3 or 5V) SCL (SPI clock line) SDA (SPI data line) RES (LCD reset, LCD needs to be reset once after power-on) DC (SPI data/command selection pin) BLK (LCD backlight control, the default can be left floating, low level to turn off the backlight) Packing List 1 x 0.96-inch 160×80 IPS LCD Breakout – ST7735 Resources ST7735S interfacing with ESP32, tutorial to use it with Node32-Lite. ESP32 + 1.3 inch 240×240 IPS LCD (ST7789 SPI interface), using TFT_eSPI library, interface with ESP32 and we have verified it. You will need to choose the correct driver for ST7735. Tutorial – Using the 0.96″ 80 x 160 Full Color IPS LCD Module with Arduino, by tronixstuff.com M