RGB Clear LED Common Anode 5mm

Description

DESCRIPTION These are general purpose 5mm RGB common anode (CA) LEDs that have a water clear lens. KEY FEATURES OF LED RGB 5MM CA WATER CLEAR LENS: RGB (Red/Green/Blue) LEDs contained in same package Common anode (CA) 5mm diameter Water clear lens 20mA max drive current Forward voltage drop of 2.1V red and 2.8V for blue and green The LED is common anode (CA) which means that all 3 of the LEDs have their anodes tied together. The anode which is the longest lead is connected to Vcc and the red, green and blue LED pins should be connected to digital or PWM output pins that will be driven active LOW to light the LEDs. Calculating LED Resistor Values These R/G/B LED pins must have series current limiting resistors to prevent damage to the LED or the MCU that is driving them. They are logic compatible with a max drive current of 20mA and a typical forward voltage drop of 2.1V for the red and 2.8V for the green and blue LEDs. At an operating voltage of 5V, series voltage dropping resistors of 150Ω for red and 110Ω for blue and green will provide max brightness or larger resistors of around 220- 470Ω can be used to reduce current at a lower brightness. TECHNICAL SPECIFICATIONS Type RGB Color Red / Green / Blue Lens Shape Circular Dimensions 5 x 8.5mm Appearance Clear Intensity High Brightness Viewing Angle To Half Brightness 60 Degrees Maximum Ratings IF Maximum Forward Current 20mA VF Maximum Forward Voltage 2.1V Red (Typical) 2.8V Green (Typical) 2.8V Blue (Typical) Package Type Pl