AT90S8515-8PC Microcontrollers IC HCMOS FLASH 8bit 8MHz 8KB DIP-40

Description

Features: 8K bytes of In-System ProgrammableFlash. 512 bytes EEPROM. 512 bytes SRAM. 32 general-purpose I/O lines. 32 generalpurpose working registers. flexible timer/counters with compare modes. internal andextemal interrupts. a programmable serial UART. programmable Watchdog Timer withinternal oscillator. an SPI serial port and two softwareselectable powersaving modes. The Idle Mode stops the CPU while allowing the SRAM, timer/counters. SPI port andinterrupt system to continue functioning. Low power. High-speed CMOS Process Technology. Fully Static Operation. On-chip Analog Comparator. Master/Slave SPI Serial Interface. AVR: High performance and Low power. Microcontroller: Low power Idle,External and Internal Interrupt Sources and Power down Modes. The Power-down mode saves the register con-tents but freezes the oscillator, disabling all other chip functions until the next externalinterrupt or hardware reset. The device is manufactured using Atmel’s high-density nonvolatile memory technology. The On chip InSystem Programmable Flash allows the program memory to be reprogrammed InSystem through an SP! serial interface or by a conventional nonvolatilememory prograer. By combining an enhanced RISC 8bit CPU with InSystem Programmable Flash on a monolithic chip. The Atmel AT90S8515 is a powerful microcontroller that providesa highly flexible aosteffective solution to many embed-ded control applications. The AT90S8515 AVR is supported with a full suite of program and system develo