STM32F030C8T6 Minimum System ARM Development Board Module

Description

STM32F030C8T6 Minimum System ARM Development Board Module the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit. the core board is divided into two rows leads to all the I / O port. with SWD simulation debug download interface, simple and convenient, debugging speed. the use of the Micro USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface. RTC crystal Epson brand, easy to start, more stable. with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner. Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner. Chip features Core: Arm??32-bit Cortex?-M0 CPU, frequency up to 48 MHz Memories 16 to 256 Kbytes of Flash memory 4 to 32 Kbytes of SRAM with HW parity CRC calculation unit Reset and power management Digital & I/Os supply: VDD?= 2.4 V to 3.6 V Analog supply: VDDA?= VDD?to 3.6 V Power-on/Power down reset (POR/PDR) Low power modes: Sleep, Stop, Standby Clock management 4 to 32 MHz crystal oscillator 32 kHz oscillator for RTC with calibration Internal 8 MHz RC with x6 PLL option Internal 40 kHz RC oscillator Up to 55 fast I/Os All mappable on external interrupt vector